生物打印技术在精准医学领域研究应用现状的中(7)
[35] SKELLEY NW, HAGERTY MP, STANNARD JT, et al. Sterility of 3D-Printed Orthopedic Implants Using Fused Deposition Modeling. ;43(1):46-51.
[36] FRIZZIERO L, LIVERANI A, DONNICI G, et al. New Methodology for Diagnosis of Orthopedic Diseases through Additive Manufacturing Models. Symmetry. 2019;11(4):27.
[37] DONG XP, ZHANG YW, PEI YJ, et al. Three-dimensional printing for the accurate orthopedics: clinical cases analysis. Biodes Manuf. 2020;3(2):122-132.
[38] BRUNS N, KRETTEK C. 3D-printing in trauma surgery : Planning, printing and processing. Unfallchirurg. 2019;122(4):270-277.
[39] ALLEN B, MOORE C, SEYLER T, et al. Modulating antibiotic release from reservoirs in 3D-printed orthopedic devices to treat periprosthetic joint infection. J Orthop Res. 2020;38(10):2239-2249.
[40] HAN C, YAO Y, CHENG X, et al. Electrophoretic Deposition of Gentamicin-Loaded Silk Fibroin Coatings on 3D-Printed Porous Cobalt-Chromium-Molybdenum Bone Substitutes to Prevent Orthopedic Implant Infections. Biomacromolecules. 2017;18(11):3776-3787.
[41] VIJAYAVENKATARAMAN S, GOPINATH A, LU WF. A new design of 3D-printed orthopedic bone plates with auxetic structures to mitigate stress shielding and improve intra-operative bending. Biodes Manuf. 2020;3(2):98-108.
[42] 朱浩,郑孟杰,李延超,等.3D 打印技术在颧上颌复合体骨折治疗中应用[J].创伤与急危重病医学,2020,8(5):335-337.
[43] 凌昊楠,李松军.3D 打印复合支架修复软骨缺损的研究进展[J].医学综述,2020,26(18):3572-3576,3582.
[44] 李焕龙,耿承奎,陈帅,等.3D 打印技术在骨盆手术中的应用[J].实用医学杂志,2020,36(17):2329-2333.
[45] 唐保明,李钊伟,杨爱荣,等.3D 打印技术辅助治疗复杂髋臼骨折的疗效研究[J].中国医学装备,2020,17(9):107-110.
[46] 刘婷,杨德雨,刘莉,等.3D 打印技术在脑血管病中的应用进展[J].中国卒中杂志,2020,15(8):916-920.
[47] CHEN H, HAN Q, WANG C, et al. Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review. Front Bioeng ;8:609.
[48] BARTOLOMEU F, DOURADO N, PEREIRA F, et al. Additive manufactured porous biomaterials targeting orthopedic implants: A suitable combination of mechanical, physical and topological properties. Mater Sci Eng C Mater Biol Appl. 2020;107:.
[49] GAO CH, WANG CY, JIN H, et al. Additive manufacturing techniquedesigned metallic porous implants for clinical application in orthopedics. RSC Adv. 2018;8(44):-.
[50] HAN X, YANG D, YANG C, et al. Carbon Fiber Reinforced PEEK Composites Based on 3D-Printing Technology for Orthopedic and Dental Applications. J Clin Med. 2019;8(2):240.
[51] BOSE S, BANERJEE D, SHIVARAM A, et al. Calcium phosphate coated 3D printed porous titanium with nanoscale surface modification for orthopedic and dental applications. Mater Des. 2018;151:102-112.
[52] NARITA M, TAKAKI T, SHIBAHARA T, et aI. Utilization of desktop 3D printer-fabricated “Cost-Effective” 3D models in orthognathic Plast Reconstr Surg. 2020;42(1):24.
[53] LOUVRIER A, MARTY P, BARRABé A, et al. How useful is 3D printing in maxillofacial surgery?. J Stomatol Oral Maxillofac ;118(4):206-212.
[54] DATTA P, AYAN B, OZBOLAT IT. Bioprinting for vascular and vascularizedtissue biofabrication. Acta Biomater. 2017;51:1-20.
[55] MONDSCHEIN RJ, KANITKAR A, WILLIAMS CB, et al. Polymer structureproperty requirements for stereolithographic 3D printing of soft tissue engineering scaffolds. Biomaterials. 2017;140:170-188.
[56] ALI M, P R AK, LEE SJ, et al. Three-dimensional bioprinting for organ bioengineering: promise and pitfalls. Curr Opin Organ ;23(6):649-656.
[57] WU Y, RAVNIC DJ, OZBOLAT IT. Intraoperative Bioprinting: Repairing Tissues and Organs in a Surgical Setting. Trends Biotechnol. 2020;38(6):594-605.
[58] ESWARAMOORTHY SD, RAMAKRISHNA S, RATH SN. Recent advances in three-dimensional bioprinting of stem cells. J Tissue Eng Regen Med.2019;13(6):908-924.
[59] LEI M, WANG X. Biodegradable Polymers and Stem Cells for 2016;21(5):539.
[60] AXPE E, OYEN ML. Applications of Alginate-Based Bioinks in 3D Bioprinting. Int J Mol Sci. 2016;17(12):1976.
[61] SHANJANI Y, KANG Y, ZARNESCU L, et al. Endothelial pattern formation in hybrid constructs of additive manufactured porous rigid scaffolds and cell-laden hydrogels for orthopedic applications. J Mech Behav Biomed Mater. 2017;65:356-372.
[62] VITHANI K, GOYANES A, JANNIN V, et al. An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipidbased Drug Delivery Systems. Pharm Res. 2018;36(1):4.
[63] TRENFIELD SJ, AWAD A, MADLA CM, et al. Shaping the future: recent advances of 3D printing in drug delivery and healthcare. Expert Opin Drug Deliv. 2019;16(10):1081-1094.
[64] MAZZOCCHI A, SOKER S, SKARDAL A. 3D bioprinting for highthroughput screening: Drug screening, disease modeling, and precision medicine applications. Applied Physics Reviews. 2019;6(1):0.
文章来源:《精准医学杂志》 网址: http://www.jzyxzz.cn/qikandaodu/2021/0715/671.html